Under dash trim covering wiring.

Technical advice Q&A

Topic author
Stevejaguar
Posts: 94
Joined: Mon Jul 18, 2016 10:55 am
Great Britain

#1 Under dash trim covering wiring.

Post by Stevejaguar » Thu May 13, 2021 9:00 pm

Series 1 2+2.
Hi does anyone have a photo of the trim that covers the wiring on the LHS bulkhead fitted please?

Part number BD 29152.

The parts book says its fitted with 3 bifurcated rivets but there is no way my cover is going to line up with any holes in the bulkhead ( I can only find 2 ).

Does it clip to the bulkhead or the A post trim panel ?
Steve

Link:
BBcode:
HTML:
Hide post links
Show post links


Topic author
Stevejaguar
Posts: 94
Joined: Mon Jul 18, 2016 10:55 am
Great Britain

#2 Re: Under dash trim covering wiring.

Post by Stevejaguar » Fri Jun 25, 2021 8:07 pm

Hi, anyone have photos of how this wiring is held in place ?
Steve
Attachments
IMG_20210625_200526.jpg
IMG_20210625_200526.jpg (30.63 KiB) Viewed 251 times
IMG_20210625_200013.jpg
IMG_20210625_200013.jpg (24.69 KiB) Viewed 251 times

Link:
BBcode:
HTML:
Hide post links
Show post links


tim wood
Posts: 895
Joined: Fri Nov 20, 2009 6:52 pm
Location: Leighton Buzzard UK
Great Britain

#3 Re: Under dash trim covering wiring.

Post by tim wood » Sat Jun 26, 2021 9:11 pm

I never got mine to line up with any of the holes.
Simply drilled new ones and secured it with trim screws with cups. Secured to the left hand panel. The cover was trimmed to match the footwell trim and the screws were not visible once the footwell panel was in place.


Tim
Series 1 FHC purchased 40 years ago. Courted my wife in it.
Series 1 2+2 when the kids were small now sold.
Series 1.5 OTS in opalescent maroon, Californian car. My retirement present.

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic