Tailgate stay S1

Technical advice Q&A

Topic author
phoenix
Posts: 261
Joined: Sun Oct 25, 2020 11:49 am
Location: Blackpool
Great Britain

#1 Tailgate stay S1

Post by phoenix » Thu May 27, 2021 9:45 am

Hi the car I am building has no holes for the stay on the rear panel. How does it attach ie self tappers ?
S1 4.2 RHD Bryan

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

rswaffie
Posts: 1539
Joined: Sat Jul 19, 2014 7:56 am
Location: Lincolnshire
Great Britain

#2 Re: Tailgate stay S1

Post by rswaffie » Thu May 27, 2021 2:15 pm

According to the S14.2 parts catalogue in the knowledge base, the stay is secured to the body with 3 self tappers. Check the catalogue against your chassis no. to be sure.
Richard

S1 3.8 FHC Opalescent Golden Sand with Tan Trim 8895**
Now enjoying my diy nut ‘n’ bolt restoration. :swerve: :wrench: :hammer: :fingerscrossed:

Link:
BBcode:
HTML:
Hide post links
Show post links


Topic author
phoenix
Posts: 261
Joined: Sun Oct 25, 2020 11:49 am
Location: Blackpool
Great Britain

#3 Re: Tailgate stay S1

Post by phoenix » Thu May 27, 2021 2:52 pm

Thanks I will do that. Bryan
I have no holes on the inner panel of the boot just the two on the tailgate .Can someone give me a clue ie measuring from centre or the side of boot.
S1 4.2 RHD Bryan

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic