S1 heater box cable

Technical advice Q&A

Topic author
phoenix
Posts: 351
Joined: Sun Oct 25, 2020 11:49 am
Location: Blackpool
Great Britain

#1 S1 heater box cable

Post by phoenix » Wed Sep 08, 2021 11:24 am

Hi can anyone tell me where the operating bowden cable goes through the bulkhead . The cable to the valve has a hole in the bulkhead behind it so that's straightforward .rhd
S1 4.2 RHD Bryan

Link:
BBcode:
HTML:
Hide post links
Show post links


Scottie
Posts: 19
Joined: Fri Sep 04, 2020 11:19 am
Location: North Carolina
United States of America

#2 Re: S1 heater box cable

Post by Scottie » Tue Sep 28, 2021 12:51 pm

I think perhaps you already have the answer to your query, but in case you don't here's a pic of the bulkhead on a left-hand drive. The heater cable for the water valve is directly behind the valve. The cable for the heater air control is 2" above that and it makes an immediate bend to go through the throttle linkage (LH Drive) and over to the the heater air box.

BTW, I did not like the cables offered by the Usual Suppliers as they are too thick and don't have a black waterproof covering like the originals. So I went to a 2nd hand lawn mower shop and bought two used control cables from them for $5.00 (US) the pair and cut them to length. They work very well. And their black coverings look like the original provided by Jaguar.


Image

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic