I presume the rather flimsy rubber seal is fixed (glued) to the opening rather than the window .
I am a novice building an E type from scratch . I have built quite a few other British and foreign cars but never an E. This forum has been very useful ,the manual is ok but it dose not help with this sort of thing .
Starting it next week the first time for 24 years before we put the bonnet on .
1/4 window seal (S1 FHC)
#2 Re: 1/4 window seal (S1 FHC)
No Bryan it's not glued , it fits in a seperate channel shaped trim--- item 47 in the picture off of Robeys website and NLA. Part numbers and diagram will be in your Workshop Parts Manual
Steve3.8
64 3.8 fhc, 67 4.2 fhc
64 3.8 fhc, 67 4.2 fhc
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#3 Re: 1/4 window seal (S1 FHC)
Sorry I should have said
the 52 inch seal round the opening light I.E. between the bodywork and the opening light .
the 52 inch seal round the opening light I.E. between the bodywork and the opening light .
S1 4.2 RHD Bryan
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#4 Re: 1/4 window seal (S1 FHC)
Yes as Steve posted above...the seal fits into a chanel thats rivited to the quarterlight opening (body)
Steve
69 S2 2+2 (just sold) ..Realm C type replica, 1960 xk150fhc
69 S2 2+2 (just sold) ..Realm C type replica, 1960 xk150fhc
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |