A quick question
-
DavidTaylor
Topic author - Posts: 1
- Joined: Thu Nov 09, 2023 9:58 am
#1 A quick question
Hello, just a quick question: I'm installing the rubber bumpers, and they seem to be at an angle. Do they angle inwards or outwards above the hubs? They fit both ways. Thanks
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
-
bitsobrits
- Posts: 562
- Joined: Tue Dec 27, 2011 2:09 am
- Location: Omaha, NE area
#2 Re: A quick question
The rubber bumpers above the rear hubs were installed by the factory angled outwards, towards the wheels.
If you are running wider wheels/tires, it's a common mod to turn them around and angle them inwards for clearance.
If you are running wider wheels/tires, it's a common mod to turn them around and angle them inwards for clearance.
Steve
'65 S1 4.2 FHC (early)
'65 S1 4.2 FHC (early)
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |