quaterlight rubber seals

Technical advice Q&A
Post Reply Previous topicNext topic

Topic author
tim wood
Posts: 1347
Joined: Fri Nov 20, 2009 6:52 pm
Location: Leighton Buzzard UK
Great Britain

#1 quaterlight rubber seals

Post by tim wood » Sun Jul 07, 2013 5:58 pm

Ok Guys ( & Girls !)

A small piece of advice please, should the quarter light seals be fitted with the longer edge of the seal< the most protruding part, around the outside. I.e closer to the bodywork.

Mine are fitted with the longer edge pushing against the frame which im not sure is correct.

any thoughts?

tim
Link:
BBcode:
HTML:
Hide post links
Show post links
Top
User avatar

abowie
Posts: 4147
Joined: Wed Sep 07, 2011 9:15 pm
Location: Australia
Australia

#2

Post by abowie » Sun Jul 07, 2013 8:31 pm

Mine are fitted with the longer edge outward, and are very probably the original ones.
Andrew.
881824, 1E21538. 889457. 1961 4.3l Mk2. 1975 XJS. 1979 MGB (supercharged).
Adelaide, Australia
Link:
BBcode:
HTML:
Hide post links
Show post links
Top

vipergts
Posts: 790
Joined: Mon Oct 08, 2007 11:17 am
Location: Kent
Great Britain

#3

Post by vipergts » Sun Jul 07, 2013 8:41 pm

Same here
S1 4.2 Roadster in Resale Red
Link:
BBcode:
HTML:
Hide post links
Show post links
Top
User avatar

ChrisC
Posts: 1291
Joined: Sun Feb 14, 2010 11:38 am
Location: Surrey UK
Contact:
Contact ChrisC
Great Britain

#4

Post by ChrisC » Mon Jul 08, 2013 12:13 pm

Doh! another job for Winter then :oops:
1964 FHC 4.2
Etype restoration blog http://connor.org.uk
Link:
BBcode:
HTML:
Hide post links
Show post links
Top
Post Reply Previous topicNext topic

Return to “Technical”