The 'E' Type Forum

Hi Guys.
I Have recently taken over as custodian of an injected V12 s3.
Took it for a shake down run, (an automotive epiphany, what an awesome car) and noticed that when I apply the brake peddle pushes back on initial application then works normally.

Anyone seen this problem before?
Any ideas on how to rectify this issue would be greatly appreciated.

I have come across this particular issue BUT before you get your hopes up
No one as come up with a solution. It is as if the pedal presses back on your foot before the brakes are applied. Anyone with a knowledge of this phenomena??

DC

Fellows,
Seems same issue as described in the running post "brake pedal kick back" in Technical / Ser 1.
I confirm having come across the same, and solved it!

Thanks,
I Checked that out, will get a rebuild kit and pull the servo apart and check it.

ralphr1780 wrote:Fellows,
Seems same issue as described in the running post "brake pedal kick back" in Technical / Ser 1.
I confirm having come across the same, and solved it!

Any one know where the above post as gone.

One of my winter jobs

thanks in advance

Here it is:
http://etypeuk.com/forum/viewtopic.php? ... ght=#35307