Talk about the E-Type Series 1
-
Topic author
Rteyp
- Posts: 18
- Joined: Mon Aug 27, 2018 8:31 am
- Location: Herts

Post
by Rteyp » Wed Aug 29, 2018 9:40 am
Hi All
First of probably many questions.
Right hand front trim was incredibly lose and heavily scratched so ordered a replacement from SNG Barratt as this sort of detail annoys me.
IMG_1337 by
John, on Flickr
IMG_1338 by
John, on Flickr
IMG_1339 by
John, on Flickr
Can anyone advise on how these should be fitted ? What black adhesive do you recommend ? I have searched for information but couldn't find. Thank you.
John
John
1965 E-Type Series 1 4.2 FHC
-
christopher storey
- Posts: 5698
- Joined: Sun Mar 09, 2008 3:07 pm
- Location: cheshire , england

Post
by christopher storey » Wed Aug 29, 2018 9:43 am
Sikaflex 221 which can also be used to fill in the gap which inevitably develops between the bottom spur and the rest of the screen surround . If you need to take the trim off again, Sikkaflex softens with a hair dryer
-
Topic author
Rteyp
- Posts: 18
- Joined: Mon Aug 27, 2018 8:31 am
- Location: Herts

Post
by Rteyp » Wed Aug 29, 2018 10:07 am
Thanks Chris - just ordered some of that.
Fitting I presume is a case of the top and bottom flange stick over the screen rubber and the long side piece tucks under the rubber where possible ?
Pics of a correctly fitted one appreciacted for reference.
Thanks
John
John
1965 E-Type Series 1 4.2 FHC
-
Gfhug
- Posts: 3834
- Joined: Thu Jun 19, 2014 3:08 pm
- Location: Near Andover, Hampshire,in D.O. Blighty

Post
by Gfhug » Wed Aug 29, 2018 11:23 am
John, be aware that some (not necessarily this piece) can be a poor fit. What people will often do is have the old part re-chromed.
BTW did you ask SNGB for a copy of their parts catalogue, a very useful reference?
Geoff
S2 FHC Light Blue
S2 OTS LHD - RHD full restoration
-
Polse7317
- Posts: 720
- Joined: Tue Oct 02, 2012 12:41 pm
- Location: FRANCE Aquitaine

Post
by Polse7317 » Wed Aug 29, 2018 2:55 pm
Yves, happy XKE 63 fhc , w113 280sl owner
Looking for a OTS 4.2 serie 1....!

and now have found a fhc xk 140

-
Topic author
Rteyp
- Posts: 18
- Joined: Mon Aug 27, 2018 8:31 am
- Location: Herts

Post
by Rteyp » Wed Aug 29, 2018 4:45 pm
Wow thank you all - I have the parts catalogue from previous owner and yes its a great source of information.
Thank you Polse for the reference photos - perfect. Looks like I have some lifting of the rubber to perform.
John
1965 E-Type Series 1 4.2 FHC
-
Polse7317
- Posts: 720
- Joined: Tue Oct 02, 2012 12:41 pm
- Location: FRANCE Aquitaine

Post
by Polse7317 » Wed Aug 29, 2018 5:56 pm
Here is the rapid glue ......15 sec ! very helpful and efficient

Yves, happy XKE 63 fhc , w113 280sl owner
Looking for a OTS 4.2 serie 1....!

and now have found a fhc xk 140

-
Jeremy66
- Posts: 105
- Joined: Sat Dec 16, 2017 6:50 pm

Post
by Jeremy66 » Wed Aug 29, 2018 10:53 pm
Just to echo the post above re the quality of fit of the repro trims, I’ve just fitted a set of SNG roadster screen chromes and they are very poor, I will be hunting out an original set to re chrome in the future, if your originals fit nicely I would find a decent chrome restorer and get them done rather than go for repro.
-
Topic author
Rteyp
- Posts: 18
- Joined: Mon Aug 27, 2018 8:31 am
- Location: Herts

Post
by Rteyp » Thu Aug 30, 2018 9:01 am
Thanks all. Any recommendations for a refurb / chrome company in Herts. Looking on the web there are some in Herts but reviews seem mixed, a recommendation would be good - thanks.
John
1965 E-Type Series 1 4.2 FHC