Brake/Clutch reservoir hoses SI 3.8

Talk about the E-Type Series 1
User avatar

Topic author
Desmo
Posts: 117
Joined: Fri Dec 05, 2014 8:52 pm
Location: Germany
Great Britain

#1 Brake/Clutch reservoir hoses SI 3.8

Post by Desmo » Sun Sep 18, 2022 6:18 pm

Hello,

I would like to replace the 3 original small reservoir botlle hoses with correct yellow sriped items. Is this hose type still available, with the characterristic yellow stripes and the correct diameters, so that the original clamps can be reused?
Thank you for your help

John

Link:
BBcode:
HTML:
Hide post links
Show post links


Danny Lee
Posts: 8
Joined: Mon Aug 12, 2013 8:51 am
Location: melbourne
Australia

#2 Re: Brake/Clutch reservoir hoses SI 3.8

Post by Danny Lee » Fri Sep 23, 2022 11:49 am

Use good quality brake hose and paint a stripe using tyre paint pens ( used for highlighting lettering) I used 3mm tape on the hose 3 bits in parallel then remove centre one and paint….. works a treat….. don’t forget the white on the water hoses

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic