My drain channel at the rear boot needs some work. It's rusted out above the number plate, where the drain pipe sits and further along where the inner finisher flange is formed. Can you buy a "U" shaped patch panel for this area. I've Checked the normal suppliers but drawn a blank.
Any advice would be much appreciated
Alun
Boot drain channel
#2 Re: Boot drain channel
The usual reply to this would be to try Monocoque Metalworks. I would expect that Chuck would have an answer .
Series 1 FHC purchased 40 years ago. Courted my wife in it.
Series 1 2+2 when the kids were small now sold.
Series 1.5 OTS in opalescent maroon, Californian car. My retirement present.
Series 1 2+2 when the kids were small now sold.
Series 1.5 OTS in opalescent maroon, Californian car. My retirement present.
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#3 Re: Boot drain channel
Hi Tim,
Yes monocoque do supply the channel. I was wondering if there was anything in the UK before I took the plunge.
Alun
Yes monocoque do supply the channel. I was wondering if there was anything in the UK before I took the plunge.
Alun
Al
Series 1, 2+2
undergoing renovation
Series 1, 2+2
undergoing renovation
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
-
Geoff Allam
- Posts: 208
- Joined: Sat Mar 31, 2018 12:55 am
#4 Re: Boot drain channel
If Monocoque supplies the channel it would be wise to purchase it as the fit will be correct in all dimensions. It could save you a lot of “fettling”.
Geoff Allam
67 series1 ots under restoration
67 series1 ots under restoration
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |