My companion flange on the input drive to the diff has a groove from the oil seal.
Has anyone had experience of using a speedy sleeve to overcome potential leaks from this type of problem. If so, were there any issues regarding the life of the oil seal because of the increased shaft thickness.
Many thanks
Alun
Shaft repair sleeves
#2 Re: Shaft repair sleeves
They're only a few thou thick. No problem with using them at all.
Andrew.
881824, 1E21538. 889457. 1961 4.3l Mk2. 1975 XJS. 1979 MGB (supercharged).
Adelaide, Australia
881824, 1E21538. 889457. 1961 4.3l Mk2. 1975 XJS. 1979 MGB (supercharged).
Adelaide, Australia
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#3 Re: Shaft repair sleeves
I've used them many times. Never a problem.
Mike - 1962 OTS 878380, 1965 Honda S600, 2001 Honda S2000
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#4 Re: Shaft repair sleeves
Highly recommended and use loctite (as a sealer) to prevent weeping.
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |