Bulkhead diagram with mounting labels

Talk about the E-Type Series 1
User avatar

Topic author
jcarey
Posts: 12
Joined: Sat Feb 12, 2011 2:17 pm
Location: Santa Barbara, CA USA
Contact:
United States of America

#1 Bulkhead diagram with mounting labels

Post by jcarey » Wed Jan 25, 2017 9:57 pm

I posted this on the Jag-Lovers E-type forum and was asked by Steve to post it here. I made this based on a diagram John North created and I found on the Internet while restoring my 1963 Coupe. I expanded on it in an attempt to label every opening and threaded opening in the bulkhead/bodywork and what each is used for. I am sure errors may be present, so please double check my work before committing to anything irreversible. Best regards.
Attachments
Firewall.jpg
Firewall.jpg (146.94 KiB) Viewed 4924 times
John
Bettie IV my 1963 S1 E-Type FHC (888373)

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

mgcjag
Moderator
Posts: 6739
Joined: Fri Jul 09, 2010 6:15 pm
Location: Ludlow Shropshire
Great Britain

#2 Re: Bulkhead diagram with mounting labels

Post by mgcjag » Wed Jan 25, 2017 10:38 pm

Thanks John....im sure it will be of intetest to the forum
Steve
69 S2 2+2 (just sold) & Building a C type replica, 1960 xk150fhc

Link:
BBcode:
HTML:
Hide post links
Show post links


288gto
Posts: 1417
Joined: Wed Nov 14, 2012 8:59 pm
Location: United Kingdom
Russia

#3 Re: Bulkhead diagram with mounting labels

Post by 288gto » Thu Jan 26, 2017 7:57 am

Thanks for posting, one initial observation is that you have the holes used for the brake vacuum pipes (lower ones) labelled as "coolant tubes"


Simon
Simon
1969 S2 OTS

Link:
BBcode:
HTML:
Hide post links
Show post links


1954Etype
Moderator
Posts: 2602
Joined: Sat Sep 27, 2008 12:32 pm
Contact:
Great Britain

#4 Re: Bulkhead diagram with mounting labels

Post by 1954Etype » Thu Jan 26, 2017 8:22 am

The '???' On the bottom line are for the choke cable grommet on a S1 car blanked off on twin carbs. Not sure the 'rust prevention blanks' are standard.
Angus 67 FHC 1E33656
61 OTS 875047

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

mark10337
Posts: 756
Joined: Wed Jul 22, 2015 11:11 am
Location: Switzerland
Switzerland

#5 Re: Bulkhead diagram with mounting labels

Post by mark10337 » Thu Jan 26, 2017 8:56 am

That's a great piece of work. Is there a version available that could be amended to the later revised bulkhead?
-Mark

1969 Series 2 OTS, Regency Red
'Life's to short to drive a boring car'

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Topic author
jcarey
Posts: 12
Joined: Sat Feb 12, 2011 2:17 pm
Location: Santa Barbara, CA USA
Contact:
United States of America

#6 Re: Bulkhead diagram with mounting labels

Post by jcarey » Thu Feb 02, 2017 2:46 pm

288gto wrote:Thanks for posting, one initial observation is that you have the holes used for the brake vacuum pipes (lower ones) labelled as "coolant tubes"


Simon
Simon,
Your correction will be added to my diagram asap! Thanks.
John
Bettie IV my 1963 S1 E-Type FHC (888373)

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Topic author
jcarey
Posts: 12
Joined: Sat Feb 12, 2011 2:17 pm
Location: Santa Barbara, CA USA
Contact:
United States of America

#7 Re: Bulkhead diagram with mounting labels

Post by jcarey » Thu Feb 02, 2017 2:48 pm

1954Etype wrote:The '???' On the bottom line are for the choke cable grommet on a S1 car blanked off on twin carbs. Not sure the 'rust prevention blanks' are standard.
Angus,
Thanks - I'll add the choke cable grommet label to this point of my diagram. I only had one example to work with at the time and it was my 1969 FHC. It's certainly possible these rust proofing plugs were added after the factory shipped it to the Northeastern USA.
John
Bettie IV my 1963 S1 E-Type FHC (888373)

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Topic author
jcarey
Posts: 12
Joined: Sat Feb 12, 2011 2:17 pm
Location: Santa Barbara, CA USA
Contact:
United States of America

#8 Re: Bulkhead diagram with mounting labels

Post by jcarey » Thu Feb 02, 2017 4:15 pm

Here is an updated version with your input
thanks,
John
Attachments
Firewall 2-2-2017-smaller.jpg
Firewall 2-2-2017-smaller.jpg (254.24 KiB) Viewed 4761 times
John
Bettie IV my 1963 S1 E-Type FHC (888373)

Link:
BBcode:
HTML:
Hide post links
Show post links


Gfhug
Posts: 2567
Joined: Thu Jun 19, 2014 3:08 pm
Location: Near Andover, Hampshire,in D.O. Blighty
Great Britain

#9 Re: Bulkhead diagram with mounting labels

Post by Gfhug » Thu Feb 02, 2017 4:26 pm

John, that's a very useful diagram. Is it possible to get a higher resolution copy?
Maybe David (Heuer) could add that to the knowledge base?

Oh, and as Mark asked earlier, is there a version for the later cars?

Thanks
Geoff
S2 FHC Light Blue
S2 OTS LHD - RHD full restoration

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Heuer
Administrator
Posts: 13836
Joined: Sat Mar 01, 2008 5:29 pm
Location: Nottinghamshire
Great Britain

#10 Re: Bulkhead diagram with mounting labels

Post by Heuer » Thu Feb 02, 2017 4:53 pm

Gfhug wrote: Maybe David (Heuer) could add that to the knowledge base?
Done!
David Jones
S1 OTS OSB; S1 FHC ODB

Add your E-Type to our World Map: viewtopic.php?f=1&t=1810

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Turnip
Posts: 124
Joined: Sat Oct 25, 2014 9:57 am
Location: Wiltshire
Great Britain

#11 Re: Bulkhead diagram with mounting labels

Post by Turnip » Fri Feb 03, 2017 4:57 pm

Speedo cable?
Unless it's labelled differently.

Simon
1965 Series 1 4.2 FHC

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Robsan
Posts: 129
Joined: Wed Jan 20, 2016 1:48 pm
Location: Cleveland UK
Great Britain

#12 Re: Bulkhead diagram with mounting labels

Post by Robsan » Sat Feb 04, 2017 9:22 pm

Do the "three holes" on LH and washer bottle on RH alternate for LHD and RHD ?

Link:
BBcode:
HTML:
Hide post links
Show post links


paulsco
Posts: 814
Joined: Mon May 04, 2009 5:12 pm
Location: Oxfordshire
Great Britain

#13 Re: Bulkhead diagram with mounting labels

Post by paulsco » Tue Feb 07, 2017 5:50 pm

Do the "three holes" on LH and washer bottle on RH alternate for LHD and RHD ?
They do on my car.

Paul
65 Series 1 FHC, 68 Jaguar 340

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Topic author
jcarey
Posts: 12
Joined: Sat Feb 12, 2011 2:17 pm
Location: Santa Barbara, CA USA
Contact:
United States of America

#14 Re: Bulkhead diagram with mounting labels

Post by jcarey » Wed Feb 08, 2017 7:59 pm

Gfhug wrote:John, that's a very useful diagram. Is it possible to get a higher resolution copy?
Maybe David (Heuer) could add that to the knowledge base?

Oh, and as Mark asked earlier, is there a version for the later cars?

Thanks
Geoff
I have the original file and could make a higher res version for you if you like - but I'd need to send it to you via email I think. I will send a PM asking for your email OK? I don't have one for later version cars.

Heuer,
If you would like to have a high res version for the knowledge base, let me know and we can exchange emails too.
Cheers,
John
Bettie IV my 1963 S1 E-Type FHC (888373)

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

mark10337
Posts: 756
Joined: Wed Jul 22, 2015 11:11 am
Location: Switzerland
Switzerland

#15 Re: Bulkhead diagram with mounting labels

Post by mark10337 » Wed Feb 08, 2017 9:20 pm

PM Sent. I'd like to adapt it for the S2.
-Mark

1969 Series 2 OTS, Regency Red
'Life's to short to drive a boring car'

Link:
BBcode:
HTML:
Hide post links
Show post links


Robbiee
Posts: 616
Joined: Sun Aug 16, 2015 12:07 pm
Location: Derbyshire

#16 Re: Bulkhead diagram with mounting labels

Post by Robbiee » Sun Nov 07, 2021 6:26 pm

Hi all
I’m planning to do a RHD version of the bulkhead diagram for 3.8 car
Anyone interested?
Robbie
Robbie 1962 3.8 Coupe OSG 1962 OTS ODG

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

mgcjag
Moderator
Posts: 6739
Joined: Fri Jul 09, 2010 6:15 pm
Location: Ludlow Shropshire
Great Britain

#17 Re: Bulkhead diagram with mounting labels

Post by mgcjag » Sun Nov 07, 2021 7:01 pm

Hi Robbie...Im sure it will be of great use and good to add to the knowledge base....Steve
Steve
69 S2 2+2 (just sold) & Building a C type replica, 1960 xk150fhc

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic