Page 1 of 1
#1 Dimensions of boot floor boards - S1 roadster
Posted: Mon Jul 31, 2017 4:01 pm
by BAHADORI
Hello,
I am looking for the dimensions of the boot boards for a roadster S1 or S2, because I would like to reproduce the boards with composite wooden ...
Can anybody please tell me dimensions A, B and C and confirm me that the original thickness is 10 mm ?
Thanks in advance for yours answers.
Jacques
#2 Re: Dimensions of boot floor boards - S1 roadster
Posted: Mon Jul 31, 2017 9:05 pm
by nefematic
S2 9mm Thickness, A:353, B:616, C:738mm. 7-Ply kind. The bottom rear part of the larger board is chamfered.
Here the dimensions for the metal bracket, semigloss black. The rubbers are the same as used for the tank flap.
Martin
#3 Re: Dimensions of boot floor boards - S1 roadster
Posted: Tue Aug 01, 2017 6:19 am
by BAHADORI
Hello Martin,
Thank you very much for this precise and valuable information.
Best Regards.
Jacques
#4 Re: Dimensions of boot floor boards - S1 roadster
Posted: Tue Aug 01, 2017 7:59 am
by Dave K
For info I had some of the metal boot board supports made in st. steel years ago when I needed one, still have some left in my garage if anyone needs one. They are blank so you would have to drill the holes etc.
Dave
#5 Re: Dimensions of boot floor boards - S1 roadster
Posted: Tue Aug 01, 2017 8:53 am
by Gfhug
Hi Dave, can you add one (or however many are needed) to my other order?
Many thanks
Geoff
#6 Re: Dimensions of boot floor boards - S1 roadster
Posted: Tue Aug 01, 2017 10:16 pm
by Dave K
OK Geoff no problem.
Dave