I'm struggling to blend a rear wheel arch repair in on my S1 FHC. What I wanted to know was in the picture below if points A, B & C should all be dead flat at the height of the middle point of the rear bumper. I currently have a dip between points A & B. Thanks, Paul.
http://uploads.im/viIKu.jpg
Rear wheel arch repair
-
PaulColeman
Topic author - Posts: 247
- Joined: Fri May 25, 2012 12:32 pm
-
PaulColeman
Topic author - Posts: 247
- Joined: Fri May 25, 2012 12:32 pm
#2 Re: Rear wheel arch repair
1965 Series 1 FHC
1976 Lotus Esprit
1976 Lotus Esprit
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#3 Re: Rear wheel arch repair
Hi Paul....google e type plan view http://inetogether.net/jaguar/showmap.php also in jag service manual body section page N26....Edit....the link above dosnt look correct......just checked my S2 2+2 with the diagram in the service manual....very similar straight from C to B and then to just befor center of wheel arch then curves in to the bumper......as the diagram if you put a straight edge across the line...Steve
Steve
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
-
PaulColeman
Topic author - Posts: 247
- Joined: Fri May 25, 2012 12:32 pm
#4 Re: Rear wheel arch repair
Thanks for the reply. I've arranged to go and have a look at one tomorrow with my rule in hand (and no, that's not a euphemism!).
Paul.
Paul.
1965 Series 1 FHC
1976 Lotus Esprit
1976 Lotus Esprit
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |