Page 1 of 1

#1 Gear lever chrome gaiter bezel

Posted: Thu Sep 21, 2017 7:08 pm
by TrevS
Hi all

I am trying to locate a new chrome bezel piece that sits on at the top of the gaiter boot. Could someone provide me with a part number or link to a place that sell them as I can't find them on SNG.

Image

Any help much appreciated

Thanks

Trevor

#2 Re: Gear lever chrome gaiter bezel

Posted: Sat Sep 23, 2017 7:58 pm
by RobMcC
Trevor,

I had a job finding one when I fitted a (non standard) leather gaiter to my S1.

The part was not listed under the e -type, but was in the XK-120 catalogue. I have not checked , but presume it is still the case.

A word of warning. The originals had a nylon tapered inner nut to trap the gaiter. The new ones have a brass one. This rattles like crazy against the gear lever, and drives me nuts. I can't face taking the tunnel off again, so have had a bus ticket stuffed down around the gear lever for 8 years. I would think a rubber sleeve or top-hat bushing might do the job better.

Regards,

Rob.

#3 Re: Gear lever chrome gaiter bezel

Posted: Mon Sep 25, 2017 7:50 am
by TrevS
Having a look online I've found 2 different bezels.

The first has is part number BD19728 and has a brass inner nut
Image

The second is from SNG part number BD19728/9 and has a plastic inner nut and appears more curved.
Image

Could someone tell me which shape is correct for my 1967 4.2 series 1?

Thanks

Trevor

#4 Re: Gear lever chrome gaiter bezel

Posted: Fri Sep 29, 2017 8:00 am
by TrevS
Sorry guys, giving this topic a bump as I still don't know which gaiter surround is the correct one, can someone help?

Trev

#5 Re: Gear lever chrome gaiter bezel

Posted: Fri Sep 29, 2017 5:37 pm
by mgcjag
Hi Trevor try looking up the part numbers....in the knowledge base S1 4.2 parts catalogue shows chrome gear gaiter bezel BD19728 used for 1E 20001-1E20102 and 1E 30001-1E30349 hope this might help..Steve

#6 Re: Gear lever chrome gaiter bezel

Posted: Sat Sep 30, 2017 12:55 pm
by Jeremy
Image

Image

Image

White nylon threaded insert on mine, with a conical male section that seats into a corresponding conical female section inside the chromed bezel. Between these two the leatherette gaiter is gripped. I'm sure it's original as my car has been pretty much unmolested.

#7 Re: Gear lever chrome gaiter bezel

Posted: Sat Sep 30, 2017 12:57 pm
by Jeremy
Oh and that black thing on the right is all that remains of the rubber gaiter. It was sitting inside the leatherette one and not doing any good obviously.

#8 Re: Gear lever chrome gaiter bezel

Posted: Mon Oct 02, 2017 1:22 pm
by Polse7317
This forum is fantastic ......I was looking , last Saturday,for that part on the SNG part catalogue for 3.8 and found nothing on . This afternoon i am lucky with these posts ...... :thankyouyellow:
Part already ordered....