The 'E' Type Forum

I am refurbishing the brakes on my serie 1 and i see on the manual an adjustable brake master cylinder push rod on the top master cylinder for the rear brakes and a NON adjustable one for the lower one for the front brakes.

Is it correct ? i have actualy two non adjustable one ..... and my brakes are blocked after 2 or 3 foot press on the pedal and i can't adjust them !!!
thank's for the advices

Yes. One rod needs to be adjustable to allow for correct setting of freeplay.

Must it be the upper one ( as i think reading the manual ) or any one ?

Mine is the upper one.

Thank's Andrew

Workshop manual shows upper cylinder fitted with an adjustable fork and this feeds the rear brakes....my car is the same