Looking for an S1 OTS project car

Talk about the E-Type Series 1

Topic author
NJJ
Posts: 5
Joined: Tue Mar 05, 2019 11:03 am
Great Britain

#1 Looking for an S1 OTS project car

Post by NJJ » Tue Mar 05, 2019 11:14 am

Hi Guys, a pleasure to be newly registered on this site and already the wealth of information contained has been extremely useful. As stated, I am looking for an S1 OTS 4.2 (ideally) to be fully restored. Brightwells have a forthcoming auction tomorrow (Wed 6 March) where they are selling an early 3.8 S1 OTS, I did not know if any members out there had knowledge of the car in question or have possibly even seen it? The auction team can walk me around it on the phone but I would much rather see it in person for obvious reasons but I am unfortunately away on business currently.

Thank you in advance of any assistance and should anyone know of any other examples out there that may better fit the bill, I would be extremely grateful.

Best regards,
Nick

Link:
BBcode:
HTML:
Hide post links
Show post links


Robbiee
Posts: 714
Joined: Sun Aug 16, 2015 12:07 pm
Location: Derbyshire

#2 Re: Looking for an S1 OTS project car

Post by Robbiee » Tue Mar 05, 2019 12:32 pm

Hi Nick
You need to be very sure of what you want, a 3.8 or a 4.2.

The auction car certainly looks like a genuine early 3.8
The flat floor ones command a better price due to rarity.

There are some cosmetic alterations and the exhaust is later but all sortable easily

It’s good to see the body number IDplate in the boot side panel

Try putting the details into xkedata website...it might come up with some more history

I bought a similar condition (But RHD) roadster March 62 for £40,000 two years ago

It will require a rebuild I’m sure and you may want to convert to RHD. BUT these early ones are probably the only cars that will allow ANY return on the restoration cost

It’s prob spent time in a salt free area which is good

Just my opinion
Robbie 1962 3.8 Coupe OSG 1962 OTS ODG

Link:
BBcode:
HTML:
Hide post links
Show post links


Robbiee
Posts: 714
Joined: Sun Aug 16, 2015 12:07 pm
Location: Derbyshire

#3 Re: Looking for an S1 OTS project car

Post by Robbiee » Tue Mar 05, 2019 1:29 pm

It’s not listed on XKEdata yet

I’d be interested to see what it sells for, the market has slipped a little but these early cars will always be more desirable and there are less and less that haven’t been restored
If you do go for it it really should be restored using as many of the original parts as possible and NOT upgraded (brakes, gearbox etc)

Interesting that it has a thumb grooved later steering wheel
I’m not sure when the change came, but, like many things Etype, it can be hard to define change dates
Robbie
Robbie 1962 3.8 Coupe OSG 1962 OTS ODG

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

mgcjag
Moderator
Posts: 8981
Joined: Fri Jul 09, 2010 6:15 pm
Location: Ludlow Shropshire
Great Britain

#4 Re: Looking for an S1 OTS project car

Post by mgcjag » Tue Mar 05, 2019 1:50 pm

Im going to look around tomorrow....anyone needing detailed photos then let me know of what parts..Steve
Steve
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Philk
Posts: 763
Joined: Wed Dec 07, 2016 7:48 am
Great Britain

#5 Re: Looking for an S1 OTS project car

Post by Philk » Tue Mar 05, 2019 6:58 pm

NJJ wrote:
Tue Mar 05, 2019 11:14 am
Thank you in advance of any assistance
Having looked at the car online, the main caveat would be the absence of the original engine. This will definitely affect its value.

On early 3.8s, the body number will also be on the right-hand bonnet brace (which joins the right front wing to the centre section). Worth checking this matches the body number on the tag in the rear of the car. If the body number is missing then it is not the original bonnet (not necessarily unusual given they easily corrode or get damaged but another thing to look at). Linked to this, I also can see that the Bonnet support frame is a different colour to the Engine/Picture Frames so that might not be original.

One other minor thing I spotted (aside from the large dent in its side) is that, somewhat strangely, it is missing some unusual pieces (e.g. the reversing and interior lamps). Why these are missing (given they are relatively cheap) is a bit of a mystery and could point to other more parts missing elsewhere.
Phil
1964 S1 3.8 OTS

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

mgcjag
Moderator
Posts: 8981
Joined: Fri Jul 09, 2010 6:15 pm
Location: Ludlow Shropshire
Great Britain

#6 Re: Looking for an S1 OTS project car

Post by mgcjag » Wed Mar 06, 2019 5:57 pm

Very supprising..the S1.didnt sell.....where as the silver S2 fhc was a real pile of rust.....the photos looked ok but they were taken befor the car was stripped...it needed a complete new body ...sold for £19250 + commission..can only see this was purchased for the registration......engine was from an XJ6.....Anyone here buy it......Steve
Steve
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc

Link:
BBcode:
HTML:
Hide post links
Show post links


Topic author
NJJ
Posts: 5
Joined: Tue Mar 05, 2019 11:03 am
Great Britain

#7 Re: Looking for an S1 OTS project car

Post by NJJ » Thu Mar 07, 2019 1:43 pm

mgcjag wrote:
Wed Mar 06, 2019 5:57 pm
Very supprising..the S1.didnt sell.....where as the silver S2 fhc was a real pile of rust.....the photos looked ok but they were taken befor the car was stripped...it needed a complete new body ...sold for £19250 + commission..can only see this was purchased for the registration......engine was from an XJ6.....Anyone here buy it......Steve
Hi Steve thank you so much for your contributions and to the other members that have also. Do you know what the bidding got to with the S1 3.8? I thought I would also speak to Brightwells to try and understand what has now happened to her.

Best regards,
Nick

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

mgcjag
Moderator
Posts: 8981
Joined: Fri Jul 09, 2010 6:15 pm
Location: Ludlow Shropshire
Great Britain

#8 Re: Looking for an S1 OTS project car

Post by mgcjag » Thu Mar 07, 2019 1:54 pm

Hi Nick...no sorry diddnt watch the bidding.....when a car dosnt reach the reserve the auctioneers usually announce that anyone interested should contact them as still a deal to be done.....im only 20mins away from Brightwells if you need any help...Steve
Steve
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

politeperson
Posts: 1380
Joined: Tue Jun 07, 2016 8:26 pm
Location: Boston UK
Great Britain

#9 Re: Looking for an S1 OTS project car

Post by politeperson » Thu Mar 07, 2019 8:54 pm

The highest bid on the S1 OTS was £36,000, I was watching.

Unsold but still up for grabs if you phone Brightwells.
Finishing off an S1 roadster

Link:
BBcode:
HTML:
Hide post links
Show post links


Topic author
NJJ
Posts: 5
Joined: Tue Mar 05, 2019 11:03 am
Great Britain

#10 Re: Looking for an S1 OTS project car

Post by NJJ » Fri Mar 08, 2019 10:21 am

Hi Guys, Thank you again for all of your help and for your kind offers of assistance. I spoke to Brightwells yesterday and the S1 OTS is provisionally sold. So as it says on The Apprentice, the search continues! Should anyone know of a structurally sound S1 OTS project car (ideally 4.2 but can work with a 3.8) then please do let me know.

Enjoy the weekend all.

Link:
BBcode:
HTML:
Hide post links
Show post links


Gfhug
Posts: 3750
Joined: Thu Jun 19, 2014 3:08 pm
Location: Near Andover, Hampshire,in D.O. Blighty
Great Britain

#11 Re: Looking for an S1 OTS project car

Post by Gfhug » Fri Mar 08, 2019 2:59 pm

S2 FHC Light Blue
S2 OTS LHD - RHD full restoration

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic