Master Brake/ Clutch Cylinder Aluminium Tags

[Gadget]

I have just had a batch of 50 Aluminium tags cut. The dimensions were taken from an original 1961 tag that is in very good condition. I am awaiting delivery of the correct size number and letter punches and have to make a punching jig. If any forum members are interested please let me know, I will not be putting them on eBay etc. I have had them made for my car but the minimum quantity was 50 hence the spares. I do not yet know the cost as I am expecting the letter and number punching to be rathe fiddly.

[DWW]

Interesting🤨

[Allrand]

Up to which year/car no were they fitted?

[Philk]

Yes Please - two of these for my brake cylinders. There is a very useful article (post #66 on the 3.8 Factory Fit section) showing what stamping is required. viewtopic.php?f=4&t=2006&p=39720&hilit=tag#p39720. There are two different part numbers for each of the brake master cylinders which are then date coded. Would you potentially offer these for different years?

I am not sure whether the clutch master cylinder had the same type of tag though. If it is, could you please add another one for that.

[Robbiee]

If be interested in a couple
Robbie

[Allrand]

I'd be interested in 3 (2xbrakes,1clutch).

[Geoff Allam]

I would also be interested in 3.

[DWW]

Two here please (2).

[Apprentice Engineer]

Yes - I am interested in two for the brake cylinders and one for the clutch cylinder.
Many thanks.

[Maikel]

4 brake and
2 clutch

please

[Allrand]

Hi Maikel, you're the originalty guru, did all 3. 8's have the MC tags?

[mxke]

I would be interested in three please.
Mike

[Slipstream]

As to how long the tags were on, my 1967 ots (1E15221) has one.

[Allrand]

That's useful info Bob.

[Ruurd Schut]

Nice !
If possible I would like to have 3 pcs. for my early 3.8

Thanks,
Ruurd

[265bhp]

Hi
Me too…….x2 for brakes and clutch as well if that’s period correct for early ‘63

[Polse7317]

If possible….i.d be glad to have 3 of them

[dlgis]

And a set of 3 for me too please

[lopena]

I’ll take a set of three for my ‘64 E-type 3.8 please.

Many thanks,
Alan
New Jersey, USA

[SpeedieJag]

Hi, I'll like a set of three for my car - two brake, one clutch.

Thanks,
James
Fullerton, CA USA