Hello all,
Please can someone share some photos of the correct tool kit for a S1 4.2 OTS, or links to what it should look like?
Many thanks.
Ulverston
S1 4.2 OTS Tool Kit photos needed
#2
David Jones
S1 OTS OSB
1997 Porsche 911 Guards Red
2024 Lexus LBX
Add your E-Type to our World Map: http://forum.etypeuk.com/viewtopic.php?f=1&t=1810
S1 OTS OSB
1997 Porsche 911 Guards Red
2024 Lexus LBX
Add your E-Type to our World Map: http://forum.etypeuk.com/viewtopic.php?f=1&t=1810
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#4 Makers of E-type tools
Hi David,
Update from me. I have been collecting various bits from all over the place, and now have a reasonable selection to start putting a couple of toolkits together.
The bad news is the makers of the different tools vary a lot, e.g. spanners from SSP, Snail, Carrington etc... Were the set makers used for the E-type S1 or was it another thing that was down to the parts bin at the time, so all are correct?
Best.
Ulverston
Update from me. I have been collecting various bits from all over the place, and now have a reasonable selection to start putting a couple of toolkits together.
The bad news is the makers of the different tools vary a lot, e.g. spanners from SSP, Snail, Carrington etc... Were the set makers used for the E-type S1 or was it another thing that was down to the parts bin at the time, so all are correct?
Best.
Ulverston
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |