Front wing seperators

alunwill · Post by **alunwill** » Tue Dec 09, 2025 6:05 pm

Does anyone have the part number for the spacers between centre panel and wings which allow the chrome bead to fit.

Many thanks

Al

alunwill · Post by **alunwill** » Tue Dec 09, 2025 6:15 pm

Found it, C10193

Gfhug · Post by **Gfhug** » Fri Dec 12, 2025 6:31 pm

And available from lots of sources rather than buying expensive OEM. It’s just a thickish washer

Edited, needing some replacement brass clips to hold the chrome strip in place I made my own from a sheet of brass. So much cheaper than buying from the usuals.

Geoff

johnetype · Post by **johnetype** » Fri Dec 12, 2025 9:57 pm

And given the rust trap this particular area is, I used nylon washers when I rebuilt my bonnet.

265bhp · Post by **265bhp** » Sat Dec 13, 2025 6:32 pm

Fully agree with johnetype…did exactly the same….black

alunwill · Post by **alunwill** » Sat Dec 13, 2025 7:48 pm

Many thanks for the responses. I like the idea of the nylon washers. The brass clips is a sensible option.

Alun

Gfhug · Post by **Gfhug** » Sat Dec 13, 2025 8:34 pm

Stainless is another option, including for the bolts/nuts/washers holding the panels together

Geoff

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

The 'E' Type Forum

Front wing seperators

#1 Front wing seperators

#2 Re: Front wing seperators

#3 Re: Front wing seperators

#4 Re: Front wing seperators

#5 Re: Front wing seperators

#6 Re: Front wing seperators

#7 Re: Front wing seperators