Page 1 of 1
#1 Front wing seperators
Posted: Tue Dec 09, 2025 6:05 pm
by alunwill
Does anyone have the part number for the spacers between centre panel and wings which allow the chrome bead to fit.
Many thanks
Al
#2 Re: Front wing seperators
Posted: Tue Dec 09, 2025 6:15 pm
by alunwill
Found it, C10193
#3 Re: Front wing seperators
Posted: Fri Dec 12, 2025 6:31 pm
by Gfhug
And available from lots of sources rather than buying expensive OEM. It’s just a thickish washer
Edited, needing some replacement brass clips to hold the chrome strip in place I made my own from a sheet of brass. So much cheaper than buying from the usuals.
Geoff
#4 Re: Front wing seperators
Posted: Fri Dec 12, 2025 9:57 pm
by johnetype
And given the rust trap this particular area is, I used nylon washers when I rebuilt my bonnet.
#5 Re: Front wing seperators
Posted: Sat Dec 13, 2025 6:32 pm
by 265bhp
Fully agree with johnetype…did exactly the same….black
#6 Re: Front wing seperators
Posted: Sat Dec 13, 2025 7:48 pm
by alunwill
Many thanks for the responses. I like the idea of the nylon washers. The brass clips is a sensible option.
Alun
#7 Re: Front wing seperators
Posted: Sat Dec 13, 2025 8:34 pm
by Gfhug
Stainless is another option, including for the bolts/nuts/washers holding the panels together
Geoff