Fog light for my Series 1

[ETTony]

There is no fog light on the back of my car.

Q. It is a 1967, do i need one for the MoT ?

Even if it is not required for MoT, should I decide to fit one what do you guys use.
I am defo not interested in a single red light randomly hanging down

Is there a good red/white, fog/ reverse lens that would replace the integral reverse white lens.

thanks again

Tony 1967, DHC, LHD, series one, black

[Heuer]

Not required for an MOT on cars manufactured before 1980 but if you do fit one it will need to follow current regulations. Never bothered with one myself.

[ETTony]

Not required for an MOT on cars manufactured before 1980 but if you do fit one it will need to follow current regulations. Never bothered with one myself.

Super, thanks

[Heuer]

If you do fit one the switch must be in the drivers line of sight and have a tell tale light. Hidden switch would be an MOT fail unless you used something like a dual colour LED bulb in the reversing light housing.

[ETTony]

If you do fit one the switch must be in the drivers line of sight and have a tell tale light. Hidden switch would be an MOT fail unless you used something like a dual colour LED bulb in the reversing light housing.

Good point, thanks