Talk about the E-Type Series 2
-
Topic author
mach2andy
- Posts: 298
- Joined: Wed Jun 21, 2017 9:31 am

Post
by mach2andy » Fri Jul 13, 2018 11:39 am
Andy
1970 S2 FHC
1965 SB Corvette Ragtop
-
Richardhealey
- Posts: 218
- Joined: Sun Apr 09, 2017 6:31 pm
- Location: Berkhamsted

Post
by Richardhealey » Fri Jul 13, 2018 7:53 pm
Nice job Andy,
Can you tell me what you lagged the pipes with exactly. I have been contemplating what to use for my new pipes. Currently I have used standard plumbers foam insulation, which I have cable tied tightly every few inches, so as to reduce the overall diameter, as I am aware the lagging needs to be a smallish diameter to prevent it fouling the lower vacuum pipe. If that makes sense!
Many thanks,
Rich
1969 series 2, 2+2... going for a full rebuild.. Gulp...
-
Topic author
mach2andy
- Posts: 298
- Joined: Wed Jun 21, 2017 9:31 am

Post
by mach2andy » Sat Jul 14, 2018 10:11 am
Hi Rich
I used this from Toolstation. I didn't want anything too thick in case it made fitting more difficult, or possibly foul the wiper mechanism. My new pipes came with a set of flange plates, but I used my originals as I'd already cleaned and primed them. So my new ones are going spare if anyone wants them?
ATB
Andy

Andy
1970 S2 FHC
1965 SB Corvette Ragtop
-
Topic author
mach2andy
- Posts: 298
- Joined: Wed Jun 21, 2017 9:31 am

Post
by mach2andy » Sat Jul 14, 2018 10:16 am
The screenshot isn't that clear. The thermal wrap is Toolstation item 67097.
Andy
Andy
1970 S2 FHC
1965 SB Corvette Ragtop
-
Richardhealey
- Posts: 218
- Joined: Sun Apr 09, 2017 6:31 pm
- Location: Berkhamsted

Post
by Richardhealey » Sat Jul 14, 2018 4:35 pm
Thanks gents, that’s great. I hadn’t come across these options in my searches.
Cheers

1969 series 2, 2+2... going for a full rebuild.. Gulp...