Can anyone advise if there should be any form of fastener to hold the footwell carpets in place for a roadster? (assume same for FHC, but you never know...)
Now that I have new floors and new carpets, I'd like to get these looking neater
Carpet fasteners
-
Topic author - Posts: 262
- Joined: Thu Jun 30, 2016 9:53 pm
#1 Carpet fasteners
Richard
- 1969 Series 2 OTS, family owned 40+ years
- 1969 Series 2 OTS, family owned 40+ years
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
- Posts: 3305
- Joined: Thu Jun 19, 2014 3:08 pm
- Location: Near Andover, Hampshire,in D.O. Blighty
#2 Re: Carpet fasteners
Richard, BAS have a complete range of carpet fasteners and should be able to advise which are suitable.
https://www.car-hood.co.uk/trimming-tools-accessories
https://www.car-hood.co.uk/carpet-fastner-prong
Check what holes there are in the floor pan to have fasteners attached in case they have been welded up and ask for Jack as he is very knowledgeable. Good luck.
Geoff
https://www.car-hood.co.uk/trimming-tools-accessories
https://www.car-hood.co.uk/carpet-fastner-prong
Check what holes there are in the floor pan to have fasteners attached in case they have been welded up and ask for Jack as he is very knowledgeable. Good luck.
Geoff
S2 FHC Light Blue
S2 OTS LHD - RHD full restoration
S2 OTS LHD - RHD full restoration
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
Topic author - Posts: 262
- Joined: Thu Jun 30, 2016 9:53 pm
#3 Re: Carpet fasteners
Much appreciated Geoff - those are the fasteners I used to have. The carpets are from BAS, so I'll check with them. I just wasn't sure what (if any) original fitment would have been. I haven't checked, but I assume there are no holes in the replacement floor pans, and I always like to match original as closely as I can.
Richard
- 1969 Series 2 OTS, family owned 40+ years
- 1969 Series 2 OTS, family owned 40+ years
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
- Posts: 3305
- Joined: Thu Jun 19, 2014 3:08 pm
- Location: Near Andover, Hampshire,in D.O. Blighty
#4 Re: Carpet fasteners
Richard, a photo of the passenger side carpet with masking tape to mark where the fasteners locate.
Don’t know how correct this is as there’s been work in the area in the past, but they seem to work. Maybe others can comment?
Cheers
Geoff
Don’t know how correct this is as there’s been work in the area in the past, but they seem to work. Maybe others can comment?
Cheers
Geoff
S2 FHC Light Blue
S2 OTS LHD - RHD full restoration
S2 OTS LHD - RHD full restoration
Link: | |
BBcode: | |
HTML: | |
Hide post links |
-
Topic author - Posts: 262
- Joined: Thu Jun 30, 2016 9:53 pm
#5 Re: Carpet fasteners
Very useful Geoff, thanks. That seems to be the area where the carpet tends to lift up. Not sure how to deal with the underlay in that area, but I will investigate. I went for the original style of underfelt rather than the modern foil backed version.
Richard
- 1969 Series 2 OTS, family owned 40+ years
- 1969 Series 2 OTS, family owned 40+ years
Link: | |
BBcode: | |
HTML: | |
Hide post links |