Page 1 of 1
#1 Nut sizes
Posted: Sun Mar 20, 2011 10:45 am
by mgcjag
Hi All.......can anyone tell me the size of the crankshaft pully nut......My socket sets not big enough......also the size & spec for the brake pipe union connection that fits into the front calipers as im replacing the pipework...Thanks, Steve
#2 Crankshaft pulley size.
Posted: Sun Mar 20, 2011 2:08 pm
by vacbag
Hello Steve.
Crankshaft pulley nut is 1" 5/16 A/F.
Steve.
#3
Posted: Sun Mar 20, 2011 7:56 pm
by christopher storey
Steve : IIRC this socket was commonly sold as a one-off for Mini drive shaft nuts and is probably more easily traced as that . As stated, however, it is 1 & 5/16 AF
#4
Posted: Sun Mar 20, 2011 9:35 pm
by ChrisC
Confirmed. I was looking for one last week but could only find it in 3/4" drive. If anyone finds one in 1/2" drive please let me know.
Yes I know I can use a convertor but it gets a little close to the picture frame
#5 1 5/16 Socket.
Posted: Sun Mar 20, 2011 10:07 pm
by vacbag
Chris.
Check out Ebay item number 370459432921.
Steve.
#6
Posted: Mon Mar 21, 2011 6:58 am
by ChrisC
Aha.... that'll do nicely. Thankyou