Electrical Gauges Not Registering
#1 Electrical Gauges Not Registering
As of a week ago, when firing up the car all the electrical guages fail to move / register. After about 15 minutes on the road they all spring into life at the same time. This includes the rev counter. Ground issue? If so, anyone able to say where is it likely to be (that affects them all like this). But is rev counter also on a common ground? A steer in the right direction could help me avoid hours of fault chasing in and around the fuse / electrical panel and in the engine bay! Regards. Gordon
Gordon James
S3 1971 - Original (JHT) LHD/Auto/Air Con. Re-imported from US via UK in 1994, rebuilt Antwerp. Dk Blue (orig Sable)/Biscuit (orig Beige)
Porsche 911SC 1983
VW T2A Bus 1971
VW Beetle Cabrio 1967 (but bit of a mixture!)
S3 1971 - Original (JHT) LHD/Auto/Air Con. Re-imported from US via UK in 1994, rebuilt Antwerp. Dk Blue (orig Sable)/Biscuit (orig Beige)
Porsche 911SC 1983
VW T2A Bus 1971
VW Beetle Cabrio 1967 (but bit of a mixture!)
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#2 Re: Electrical Gauges Not Registering
Look at the wiring diagram. They are all common to fuse 7. See if other items on that fuse are also affected before quarter of an hour has passed.
kind regards
Marek
kind regards
Marek
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#3 Re: Electrical Gauges Not Registering
I had a similar issue, the fuse itself was faulty.
Danny
1962 S1 3.8 FHC (1012/1798)
2015 Range Rover Sport SVR
"Experience is something you don't get until just after you need it."
1962 S1 3.8 FHC (1012/1798)
2015 Range Rover Sport SVR
"Experience is something you don't get until just after you need it."
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#4 Re: Electrical Gauges Not Registering
Hmmm. Both fuses 6 and 7 look brand new and seem perfect. Certainly passing current. There is one wire termination that looks a bit dodgy so will re-do and report. In the meantime, the symptoms continue - guages only spring to life after 15-20 mins.
Gordon James
S3 1971 - Original (JHT) LHD/Auto/Air Con. Re-imported from US via UK in 1994, rebuilt Antwerp. Dk Blue (orig Sable)/Biscuit (orig Beige)
Porsche 911SC 1983
VW T2A Bus 1971
VW Beetle Cabrio 1967 (but bit of a mixture!)
S3 1971 - Original (JHT) LHD/Auto/Air Con. Re-imported from US via UK in 1994, rebuilt Antwerp. Dk Blue (orig Sable)/Biscuit (orig Beige)
Porsche 911SC 1983
VW T2A Bus 1971
VW Beetle Cabrio 1967 (but bit of a mixture!)
Link: | |
BBcode: | |
HTML: | |
Hide post links |
#5 Re: Electrical Gauges Not Registering
Check them for continuity, and also the fuse blocks between the spring clips & the spade terminals.
Randall Botha
'64 3.8 fhc & '51 Mk 7
'64 3.8 fhc & '51 Mk 7
Link: | |
BBcode: | |
HTML: | |
Hide post links |