Air Filter Element

Chickencoupe · Post by **Chickencoupe** » Sun May 17, 2015 12:14 am

Hello,

Do sealing rings need to be installed with a new air filter element for a SIII V12(Part # C34348)?

The rubber casing with this element seems to serve as sealing rings and it is difficult to fit it all together when I include additional sealing rings.

Thank you for your help. I'm slowly learning my way around this thing!

Curt

42south · Post by **42south** » Sun May 17, 2015 5:09 am

I have never used them on mine. As you say the replacement filters come with a rubber sealing ring as part of the filter.
Its a no from me

PeterE · Post by **PeterE** » Sun May 17, 2015 10:50 pm

Curt, I bought some sealing rings for mine as they were missing when I first took off the air filter covers. But there just isn't room to fit them with the modern rubber-edged filters so they are sitting on a garage shelf gathering dust...

I'm confident that there is an adequate seal without them so on the shelf they'll stay.

Chickencoupe · Post by **Chickencoupe** » Mon May 18, 2015 2:11 am

Thanks a lot for your help and advice Mark and Peter.
After I realized 2 sealing rings wouldn't fit I tried just one and it wouldn't fit either. No rings worked just fine so I'm sure you are both right.

Thanks again for your help!

Curt

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

The 'E' Type Forum

Air Filter Element

#1 Air Filter Element

#2

#3

#4