Page 1 of 1

#1 Vacuum feed?

Posted: Fri Sep 23, 2022 10:45 am
by NATO
Hi,
I am doing some repairs to the fuel system due to ethanol degrading various hoses and o-rings, and noticed what looks like a vacuum feed that’s not connected to anything. Any ideas what or where it should be connected to?
Thanks
Neil

#2 Re: Vacuum feed?

Posted: Fri Sep 23, 2022 11:09 am
by MarekH
The bottom of the left rear carburettor was originally connected to the distributor vacuum retard capsule to retard the ignition at idle.

kind regards
Marek

#3 Re: Vacuum feed?

Posted: Fri Sep 23, 2022 1:54 pm
by NATO
Looks like it has been changed sometime over its life as no vacuum on the distributor now.
Thanks for your help.

#4 Re: Vacuum feed?

Posted: Sun Sep 25, 2022 11:57 pm
by lowact
Block it off, remove the rubber elbow, replace it with a rubber cap, to improve idle and efficiency.