The 'E' Type Forum

Silly me binned the old LP hose from the reservoir to the clutch/brake cylinders and the vacuum hoses before finding a replacement . I have found this https://www.merlinmotorsport.co.uk/s/br ... servo-hose
but to be clear, what is the actual inside diameter supposed to be? and any good supplyists outside of SNG, MR etc.

cheers

MK

Check out this thread: http://etypeuk.com/forum/viewtopic.php? ... ating+hose

The only hose to buy is Cohline: https://www.merlinmotorsport.co.uk/p/7m ... m-m-sph8-4
or:
http://www.carbuildersolutions.com/uk/b ... iller-hose

All 7mm ID and will fit 8mm tail.

Thanks David,
good to know that i had decided on the correct hoses from Merlin, though more out of good luck rather than science!

cheers

MK

Not the same hose! You need the one with Cohline 2337 writ large on it. You can also buy the correct hose from Hutsons.

thanks David,
I'm getting both the brake/clutch hose which is the Cohline 2337 and the vacuum hose (which was the link I posted)

cheers