LP brake hose and vacuum pipe

[Mountain King]

Silly me binned the old LP hose from the reservoir to the clutch/brake cylinders and the vacuum hoses before finding a replacement . I have found this https://www.merlinmotorsport.co.uk/s/br ... servo-hose
but to be clear, what is the actual inside diameter supposed to be? and any good supplyists outside of SNG, MR etc.

cheers

MK

[Heuer]

Check out this thread: http://etypeuk.com/forum/viewtopic.php? ... ating+hose

The only hose to buy is Cohline: https://www.merlinmotorsport.co.uk/p/7m ... m-m-sph8-4
or:
http://www.carbuildersolutions.com/uk/b ... iller-hose

All 7mm ID and will fit 8mm tail.

[Mountain King]

Thanks David,
good to know that i had decided on the correct hoses from Merlin, though more out of good luck rather than science!

cheers

MK

[Heuer]

Not the same hose! You need the one with Cohline 2337 writ large on it. You can also buy the correct hose from Hutsons.

[Mountain King]

thanks David,
I'm getting both the brake/clutch hose which is the Cohline 2337 and the vacuum hose (which was the link I posted)

cheers