XJS Brake/Clutch Pedal Box

AussieEtype · Post by **AussieEtype** » Mon May 04, 2015 2:49 pm

Does anyone know if a XJS Brake/Clutch pedal box will go into a Series 3??

Thanks

Garry

PeterCrespin · Post by **PeterCrespin** » Tue May 05, 2015 7:58 am

Not even close. There are several different types depending on brake system but they are all huge and the base is at a steep angle. It won't even go on an XJ, never mind an E.

However, why bother? All E-type pedal boxes are the same after about 66 when the one-piece alloy version arrived. You just have to add the clutch pedal and master cylinder. It's already machined to accept them and there's a nylon spacer on the pivot shaft that you replace with spring and pedal.

Pete

AussieEtype · Post by **AussieEtype** » Wed May 06, 2015 12:21 am

Thanks Pete - it is just I can get a XJS version really cheap and if it fitted I would use it.

Cheers

Garry

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

The 'E' Type Forum

XJS Brake/Clutch Pedal Box

#1 XJS Brake/Clutch Pedal Box

#2

#3