Hi,
I've been trying to identify a fitting that's on my 62 FHC, it has a knurled edge and operates something but I'm not sure what. The photo may not be clear but It's located below the heater control valve
Many thanks
Graeme
Bulkhead fitting
#1 Bulkhead fitting
- Attachments
-
- IMG_1674.JPG (72.32 KiB) Viewed 2801 times
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#2 Re: Bulkhead fitting
It’s the park adjustment for the wipers.
Fiddle with it at your peril !
Tim
Fiddle with it at your peril !
Tim
Series 1 FHC purchased 50 years ago. Courted my wife in it.
Series 1 2+2 when the kids were small now sold.
Series 1.5 OTS in opalescent maroon, Californian car. My retirement present.
Series 1 2+2 when the kids were small now sold.
Series 1.5 OTS in opalescent maroon, Californian car. My retirement present.
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#3 Re: Bulkhead fitting
Thanks for the reply Tim, I did wonder if it was wiper related but couldn't make it out in the manual.
I'm in the process of converting to RHD anyway so I'm yet to address the whole wiper issue although I believe I can adjust the existing wiper - at least that's what my auto electrician told me!?
Thanks again
Graeme
I'm in the process of converting to RHD anyway so I'm yet to address the whole wiper issue although I believe I can adjust the existing wiper - at least that's what my auto electrician told me!?
Thanks again
Graeme
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#4 Re: Bulkhead fitting
You can indeed change from lhd to rhd wiper parking. There’s a great article in the kb covering how to do it. I did it as part of my lhd to rhd conversation.
Richard
Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)
Previous owner and restorer of a S1 3.8 FHC Opalescent Golden Sand with Tan Trim 889504 (now sold and headed for Athens)
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |