Talk about the E-Type Series 2
-
Topic author
chrisallen01
- Posts: 60
- Joined: Thu Mar 06, 2014 9:01 pm
- Location: United Kingdom

Post
by chrisallen01 » Sun Feb 09, 2020 3:32 pm
Hi All
Just opened up the package with my new door cards above which were supposed to be for a series 2 FHC and laid the new one over the old one to discover that the new ones are about 1" short along the back edge. So these bargain doors cards obtained from a seller at Stoneleigh (not one of the usuals) are now going to end up being more expensive as I will have to get a pair from a reputable supplier.
Is there any differences between the S2 OTS door card and the FHC card?
Chris
69 S2 FHC OEW P1R27068
Oxford UK
-
Bob.
- Posts: 410
- Joined: Fri Sep 18, 2015 9:05 pm
- Location: North Gloucestershire

Post
by Bob. » Sun Feb 09, 2020 4:53 pm
Part numbers are different -
BD33712 BD33713 for FHC
BD33708 BD33709 for OTS
Others will know the detail differences I am sure.
Bob
'71 S3
-
mgcjag
- Moderator
- Posts: 9092
- Joined: Fri Jul 09, 2010 6:15 pm
- Location: Ludlow Shropshire

Post
by mgcjag » Mon Feb 10, 2020 9:56 am
Your replacements look like ots cards....Steve

Steve
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
-
Topic author
chrisallen01
- Posts: 60
- Joined: Thu Mar 06, 2014 9:01 pm
- Location: United Kingdom

Post
by chrisallen01 » Mon Feb 10, 2020 11:58 am
AHA, thanks Guys, so I have the door cards for an S2 OTS not a FHC. Having an E Type is a continuous learning journey, no matter how long you've had one you can still find differences between the models II was unaware of.
Chris
69 S2 FHC OEW P1R27068
Oxford UK
-
PeterCrespin
- Posts: 4561
- Joined: Fri Mar 05, 2010 8:22 pm
- Location: Gaithersburg, Maryland.
-
Contact:

Post
by PeterCrespin » Tue Feb 11, 2020 9:39 pm
They look like 2+2 cards. If they are about 21" long on the top horizontal edge they are SWB. They look circa 28" i.e. 2+2
1E75339 UberLynx D-Type; 1R27190 70 FHC; 1E78478; 2001 Vanden Plas
-
Topic author
chrisallen01
- Posts: 60
- Joined: Thu Mar 06, 2014 9:01 pm
- Location: United Kingdom

Post
by chrisallen01 » Thu Feb 13, 2020 6:00 pm
Thanks Peter, comparing the OTS image above which shows a tapered capping, my image below is my S2 FHC and it has a rectangular capping. Just awaiting delivery of the correct door cards!

Chris
69 S2 FHC OEW P1R27068
Oxford UK