A "small" question!
I have to acquire bolts for the armrests in my 1968 series 1.5 2+2.
I can purchase them from Moss Motors at 1.99 each, but the postage to New Zealand is 18.99. I'll pay that high postage cost if I have to but I could certainly purchase them locally if I knew the dimensions - but unfortunately I cannot access a sample.
Can anyone let me know the gauge, length and thread count so that I can track some down?
Thanks
Graham
Armrest bolts
#2 Re: Armrest bolts
Hi Graham...in the knowledge base section....technical....there is a Jag nuts, bolts spec guide...look up the part number you can then work out the bolt spec.....Steve viewtopic.php?f=16&t=700
Steve
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#3 Re: Armrest bolts
Many thanks, Steve. This will sort it for me.
Cheers, Graham
Cheers, Graham
1968 1.5 2+2
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#4 Re: Armrest bolts
Do yourself a favour and use either a Philips head or hex head screw.
The original is slotted and this is very hard to access.
https://www.jagspares.co.uk/product/doo ... 1%2A%2A%2A
From memory I think you're looking at a 3/16" UNF thread.
The original is slotted and this is very hard to access.
https://www.jagspares.co.uk/product/doo ... 1%2A%2A%2A
From memory I think you're looking at a 3/16" UNF thread.
Andrew.
881824, 1E21538. 889457. 1961 4.3l Mk2. 1975 XJS. 1962 MGB. 1979 MGB.
http://www.projectetype.com/index.php/the-blog.html
Adelaide, Australia
881824, 1E21538. 889457. 1961 4.3l Mk2. 1975 XJS. 1962 MGB. 1979 MGB.
http://www.projectetype.com/index.php/the-blog.html
Adelaide, Australia
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |