My new project
#21 Re: My new project
Is it a 3.8 or 4.2.....as far as im aware 3.8 spring...4.2 diaphram....but check parts catalogue for your engine.....your photos show a diaphram clutch...Steve..ps what flywheel?..how many teeth?..should have the engine number stamped on the rim
Steve
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#22 Re: My new project
If the gearbox is a replacement and clutch non etype it may have been sourced from a different Jaguar altogether, hopefully not🫤
Danny
1962 S1 3.8 FHC (1012/1798)
2015 Range Rover Sport SVR
"Experience is something you don't get until just after you need it."
1962 S1 3.8 FHC (1012/1798)
2015 Range Rover Sport SVR
"Experience is something you don't get until just after you need it."
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#23 Re: My new project
This looks like your clutch cover ....https://northernjaguar.com/products/jag ... clutch-kit
Steve
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
-
No Quarter
Topic author - Posts: 290
- Joined: Wed Sep 22, 2021 3:20 pm
- Location: Denmark

#24 Re: My new project
Thanks all, yes it could be that. Brilliant Steve
Just to be clear, engine is numbers match 3.8. Gearbox is correct Moss, but not from this car originally
Just to be clear, engine is numbers match 3.8. Gearbox is correct Moss, but not from this car originally
Mikael
63 E-Type FHC, 64 E-Type OTS, 07 XKR
Author of "Tuning Made Easy"
https://www.amazon.com/Tuning-Made-Easy ... 373&sr=8-1
63 E-Type FHC, 64 E-Type OTS, 07 XKR
Author of "Tuning Made Easy"
https://www.amazon.com/Tuning-Made-Easy ... 373&sr=8-1
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
-
No Quarter
Topic author - Posts: 290
- Joined: Wed Sep 22, 2021 3:20 pm
- Location: Denmark

#25 Re: My new project
"as far as im aware 3.8 spring...4.2 diaphram", that was my impression also, and the opinion of my very experienced local parts guy. But this book says otherwise, read, and since mine is after April 64, I actually have the correct clutch!






Mikael
63 E-Type FHC, 64 E-Type OTS, 07 XKR
Author of "Tuning Made Easy"
https://www.amazon.com/Tuning-Made-Easy ... 373&sr=8-1
63 E-Type FHC, 64 E-Type OTS, 07 XKR
Author of "Tuning Made Easy"
https://www.amazon.com/Tuning-Made-Easy ... 373&sr=8-1
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#26 Re: My new project
My Jan 64 3.8 still has a spring clutch.
Randall Botha
'64 3.8 fhc & '51 Mk 7 (now sold), previously 3.8 S-type x2, 2.4 Mk 1, XJ6 S1.
'64 3.8 fhc & '51 Mk 7 (now sold), previously 3.8 S-type x2, 2.4 Mk 1, XJ6 S1.
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
-
No Quarter
Topic author - Posts: 290
- Joined: Wed Sep 22, 2021 3:20 pm
- Location: Denmark

#27 Re: My new project
Allow me, maybe too small to put in Wanted section, this balance link has gone missing over the decades on this project, anybody have one left over? 29 (and 30 and 31, easier to make/get). C20341


Mikael
63 E-Type FHC, 64 E-Type OTS, 07 XKR
Author of "Tuning Made Easy"
https://www.amazon.com/Tuning-Made-Easy ... 373&sr=8-1
63 E-Type FHC, 64 E-Type OTS, 07 XKR
Author of "Tuning Made Easy"
https://www.amazon.com/Tuning-Made-Easy ... 373&sr=8-1
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |




