broken automatic fly wheel or drive plate

Technical advice Q&A
User avatar

Topic author
Maikel
Posts: 360
Joined: Thu Nov 14, 2013 6:45 am
Location: Germany
Contact:
Germany

#1 broken automatic fly wheel or drive plate

Post by Maikel » Fri Jun 23, 2017 12:32 pm

Who of you driving an automatic, ever checked the fly wheel?

I had a complete engine overhaul and a totally renewed auto gear box.
The fly wheel looked perfect until reassembly when we discovered this.

Now, being in process of installing the engine as one of the last things to do, this is another p.i.t.a.
I expect a non professional repair would end up in an unbalanced undrivable experience.

Two questions,
How does this failure occur, all four holes are cracked around.
Where to get a flywheel from?

The parts book states C25412 but on the wheel is 32352


Image

Image

Image

Image

Image

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

AussieEtype
Posts: 635
Joined: Wed Jun 24, 2009 10:59 am
Location: Canberra, Australia
Australia

#2 Re: broken automatic fly wheel or drive plate

Post by AussieEtype » Fri Jun 23, 2017 1:52 pm

A heavy right foot is a typical cause. A cracked auto flex plate is actually quite common on many vehicles - feel the weight of a torque converter full of oil and you appreciate how much load the flex plate has to carry. On Range Rover P38 and Landrover Discovery it would almost be considered normal to have flex plate failures.

It is something I would always check (and replace as a precaution) whenever engine and auto are separated. Having said that when I last had mine apart my flex plate was OK and continues in service bolted to a Chev flywheel serving as the starter ring gear for my 5 speed conversion.

garry
1971 Series 3 E-type OTS
1976 Series 2 XJ 12 Coupe

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

JD-JAG66
Posts: 197
Joined: Sat Mar 22, 2014 12:40 pm
Location: Italy
Italy

#3 Re: broken automatic fly wheel or drive plate

Post by JD-JAG66 » Fri Jun 23, 2017 6:14 pm

I think the part number you require is C18517*. Then again I've been know to be wrong.
I have one which came with my 1966 2+2 4.2 automatic, which I can sell if you want. My car (minus engine) had been in storage since 1983 when I got it with that flywheel inside a box of parts.


Image

Image

If you're interested, just PM me.

Have a great weekend
Last edited by JD-JAG66 on Sat Jun 24, 2017 1:27 am, edited 1 time in total.
Jan Deurinck
Series 1 - 1966 - 2+2 - LHD - American Import
Si vales, bene est, ego valeo

Link:
BBcode:
HTML:
Hide post links
Show post links

User avatar

Hugo
Posts: 1264
Joined: Mon Aug 29, 2016 11:16 am
Location: Horsham West Sussex
Contact:
Great Britain

#4 Re: broken automatic fly wheel or drive plate

Post by Hugo » Fri Jun 23, 2017 10:43 pm

Very common failure point on automatics of that era. If you're careless mating the engine to the gearbox you can put stresses on this flex plate, but even if you're careful they don't really need an excuse to crack around the holes in service. I would imagine they are some kind of spring steel - you wouldn't want to weld it or try & make one out of an old piece of scrap metal!
Incidentally, I regard the fluid flywheel as one of mankind's most brilliant inventions. Who could dream up an idea like that?
Hugo Miller - rebuilding an imported Series II OTS & converting to RHD

Link:
BBcode:
HTML:
Hide post links
Show post links

Post Reply Previous topicNext topic