Inner fulcrum needle bearings
#1 Inner fulcrum needle bearings
As part of my exponentially growing rear brake job, I noticed that the needle bearings on my inner fulcrums are in poor condition. Can I just push the pair out at the same time with a press or do I need a blind bearing puller / slide hammer?
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#2 Re: Inner fulcrum needle bearings
Yes push out together they should press out fairly easy.....a couple of sockets and a vice is enough..... Steve
Steve
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
69 S2 2+2 (sold) ..Realm C type replica, 1960 xk150fhc
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#3 Re: Inner fulcrum needle bearings
Or just tap them out with a screwdriver or punch and a hammer.
Be aware that you should replace the sleeves that the bearings run on as well.
The more jobs you do while the IRS is out the better IMO.
Be aware that you should replace the sleeves that the bearings run on as well.
The more jobs you do while the IRS is out the better IMO.
Andrew.
881824, 1E21538. 889457. 1961 4.3l Mk2. 1975 XJS. 1979 MGB (supercharged).
Adelaide, Australia
881824, 1E21538. 889457. 1961 4.3l Mk2. 1975 XJS. 1979 MGB (supercharged).
Adelaide, Australia
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |