
Steering wheel position
-
lowact
Topic author - Posts: 752
- Joined: Mon Oct 09, 2017 10:05 am
- Location: Canberra, Australia
- Contact:

#1 Steering wheel position
For my S3 left to right conversion I reused the upper steering column after rotating the ign key/flasher stalk mechanism. Steering wheel was too far towards the centre of the car. This is not adjustable but with minimal mods I have been able to improve this to just over 26 cm from the A pillar, as per pic. Please, how does this compare to original RHD?


Regards,
ColinL
'72 OTS manual V12
ColinL
'72 OTS manual V12
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
#2 Re: Steering wheel position
On my series one 26ish.
Danny
1962 S1 3.8 FHC (1012/1798)
2015 Range Rover Sport SVR
"Experience is something you don't get until just after you need it."
1962 S1 3.8 FHC (1012/1798)
2015 Range Rover Sport SVR
"Experience is something you don't get until just after you need it."
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
-
lowact
Topic author - Posts: 752
- Joined: Mon Oct 09, 2017 10:05 am
- Location: Canberra, Australia
- Contact:

#3 Re: Steering wheel position
Thanks Danny. Means the center of my steering wheel is 1cm to the left of the center of the instrument panel and the center of the seat (between the front mounts) is a further 2 cm left. Evidently ergonomics was an emerging science ...
Regards,
ColinL
'72 OTS manual V12
ColinL
'72 OTS manual V12
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |



