Am I missing a cover plate

vee eight · Post by **vee eight** » Sun Feb 28, 2016 9:21 pm

Hi All,

I was changing the gear box oil today and noticed that I might be missing a flywheel cover plate.
Firstly should there be one there and secondly if there should would I be able to fit a new one with the engine /gearbox in the car.
Please see attached photos
Thanks Phil

Phil[/img]

Post by **1954Etype** » Sun Feb 28, 2016 9:42 pm

Yes. Held on with 4 1/4" unc bolts. Available from SNG.

tim wood · Post by **tim wood** » Sun Feb 28, 2016 9:45 pm

Often available at Stonleigh. Brought mine for a tenner.
Definitely UNC bolts.

vee eight · Post by **vee eight** » Sun Feb 28, 2016 11:33 pm

1954Etype wrote:Yes. Held on with 4 1/4" unc bolts. Available from SNG.

Thanks Angus
Are you saying that I will be able to fit the plate from under the car without having to take anything apart.
Cheers Phil

abowie · Post by **abowie** » Mon Feb 29, 2016 3:04 am

I leave mine off normally.

Post by **1954Etype** » Mon Feb 29, 2016 7:33 am

Yes, Phil. Fits no problem. We like to fit them as a stone (or similar) finding its way in there could be nasty!

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

The 'E' Type Forum

Am I missing a cover plate

#1 Am I missing a cover plate

#2

#3

#4

#5

#6