One for the 3.8 guys

dal2.0litrefrogeye · Post by **dal2.0litrefrogeye** » Sun Dec 01, 2019 5:05 pm

Bumped into this in their new catalogue a lot cheaper than I've seen recently, and there products are usually good
https://www.carbuilder.com/uk/dynamator

cactusman · Post by **cactusman** » Sun Dec 01, 2019 5:27 pm

Trouble is the 3.8 used a C42 (very early 3.8s used the C45 and RB310)...advert is For a C39/40...could be made to fit but they are shorter than a C42...others will disagree but an original dynamo and working control box is quite sufficient in most circumstances here in the UK...just my view

dal2.0litrefrogeye · Post by **dal2.0litrefrogeye** » Sun Dec 01, 2019 5:33 pm

Hi if you click the link , you will see they do the c45 body too

cactusman · Post by **cactusman** » Sun Dec 01, 2019 6:04 pm

Indeed they do....how do they do it for the price

Robbiee · Post by **Robbiee** » Mon Dec 02, 2019 2:09 pm

Unless you’re putting aircon in etc the 3.8 is fine with a standard Dynamo
Robbie

cactusman · Post by **cactusman** » Mon Dec 02, 2019 5:45 pm

Agreed Robbie

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

Link:
BBcode:
HTML:
	Hide post links

The 'E' Type Forum

One for the 3.8 guys

#1 One for the 3.8 guys

#2 Re: One for the 3.8 guys

#3 Re: One for the 3.8 guys

#4 Re: One for the 3.8 guys

#5 Re: One for the 3.8 guys

#6 Re: One for the 3.8 guys