Hi, Series 1, 2+2.
I have routed my starter motor cable from the battery area, across the lower picture frame and am now going up the engine frame diagonal towards the starter motor. When I get to the area of the engine mounting does the cable go over or under the engine mounting ? Both leave the cable against the edges of the mounting area on the frame. Or does it go outside the the mounting area altogether ?
Thanks
Steve
Starter motor cable route.
-
Stevejaguar
Topic author - Posts: 176
- Joined: Mon Jul 18, 2016 10:55 am

#2 Re: Starter motor cable route.
Tadek
e-type S1 3.8 FHC - in restoration phase...
Jaguar XK120 OTS
Austin-Healey 100 BN2
e-type S1 3.8 FHC - in restoration phase...
Jaguar XK120 OTS
Austin-Healey 100 BN2
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |
-
Stevejaguar
Topic author - Posts: 176
- Joined: Mon Jul 18, 2016 10:55 am

#3 Re: Starter motor cable route.
Hi, thanks for the photos. l have now outed the cable along the underside of the top engine frames. This way it avoids all sharp edges etc.
Steve
Steve
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |








