My front brakes, well pretty sure its them ,are staring to bind after driving for a few miles stop go traffic.
I fitted a full new system, master cylindr, servo, calipesr, brake, disks etc compensater two years and 3000miles ago. HAll parts from SNG B.
Did a bit of research and replace the reactor valve on the master cylinder but no luck
When I brake I can hear a sort of thud coming from the servo so maybe the problem is there?
Any suggestions/
V12 Brakes
-
Will Caradoc-Hodgkins
Topic author - Posts: 27
- Joined: Sun Mar 16, 2008 4:51 pm
- Location: London
-
Chris Howlison
- Posts: 1
- Joined: Thu Feb 09, 2012 10:21 am
- Location: Cheshire
#2
I have just had this problem after rebuilding the brake system. The reaction valve was OK so I have fitted a new servo unit. This has fixed it. It seems rebuilding the old servo resulted in in it being too stiff for the servo spring to release it.
JCH
| Link: | |
| BBcode: | |
| HTML: | |
| Hide post links |