Talk about the E-Type Series 1
-
Topic author
patteian
- Posts: 46
- Joined: Sun Sep 28, 2008 6:54 pm
- Location: Essex
Post
by patteian » Mon Nov 14, 2016 9:34 pm
First time posting to the forum with a picture.
I have almost completed the rebuild of my Kelsey Hayes unit using Mike Cassidy's fantastic articles. I had noticed when I disassembled the unit that the Baffle for the air filter parts catalogue number 8747/VBO.10019 was missing but did not start looking for the part until I put the filter back in during the finishing stages of the rebuild.
Does anyone have a source for this part? I have tried a few brake specialists and the usual suppliers.
- VBO10019.jpg (58.3 KiB) Viewed 3778 times
1961 OTS
-
neil4444
- Posts: 809
- Joined: Fri Mar 06, 2009 10:46 pm
- Location: East Sussex
Post
by neil4444 » Tue Nov 15, 2016 8:25 am
Have you tried Richard Smith ?
Neil
1962 S1 OTS
1967 S1 FHC
-
abowie
- Posts: 4126
- Joined: Wed Sep 07, 2011 9:15 pm
- Location: Australia
-
Contact:
Post
by abowie » Tue Nov 15, 2016 10:48 am
I think that all this is is a little spring clip that stops the sintered filter sliding out. You could probably make up something to replace it or even glue the filter in place.
I don't have a KH to look at at the moment but one should be arriving in a few weeks on my new toy.
-
Topic author
patteian
- Posts: 46
- Joined: Sun Sep 28, 2008 6:54 pm
- Location: Essex
Post
by patteian » Tue Nov 15, 2016 9:07 pm
Thank you.
I will send an email to Richard.
1961 OTS
-
Dave K
- Posts: 911
- Joined: Fri Mar 06, 2009 7:19 pm
- Location: Worcestershire, UK
Post
by Dave K » Wed Nov 16, 2016 4:59 pm
The part you are looking is the spring clip that holds the sintered filter in place, I got one is a spares kit I got from JEM in Hinckley years ago.
You could Google JEM and see if they have one, I think I bought one of the very last repair kits they had.
Dave
